Aim's Mychron 3 dash came in many variants. The car version, Plus and Gold used a 26 way mil spec connector on the back. This is the mating half used to construct a wiring harness for these dash / loggers. Both Souriau and Deutsch connectors were supplied by Aim.
Comes as a housing and contacts. This connector has been put on a wiring loom and then disassembled. I looks like new but does not have the original packaging.
Full part number 851 06RC 16-26 P 50 Manufactured by Souriau. Note that this connector requires mil spec crimpers assemble.
Also available cosmetically damaged Souriau connectors on this page and the Deutsch model elsewhere on this web site.